Notice:
The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
Water Cooling
Please leave a message needs to 12v or 24v, otherwise the default shipping 12v
Multi-Extrusion
Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.
Ecosystem Compatibility
Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. Chimera+ works with our full range of E3D nozzles. The watercooled variants work with our standard water-cooling kit.
The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We've removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we've also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
Water Cooling
By switching to an Aqua water-cooled heatsink, both all-metal HotEnds can be used in the hottest of ambient environments.
The Cyclops Aqua and Chimera Aqua share a highly effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing. It's so small and lightweight that if you're looking for a water-cooled V6 equivalent then look no further!
Set 1 Package included:
1 Set Cyclops+ Fan-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
1x 0.4 brass nozzles
Set 2 Package included:
2 *Pneumatic fittings joint +1* Fan-cooled heatsink block
Set 3 Package included:
4 *Pneumatic fittings joint +1* Water-cooled heatsink block
Set 4 Package included:
1 Set Cyclops+ Heater Block
1 Pcs Brass nozzle
2 Pcs throat
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
Set 5 Package included:
1 Set Chimera+ Fan-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
2x 0.4 brass nozzles
Set 6 Package included:
1 Set Chimera+ & Cyclops+ Fan-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
3x 0.4 brass nozzles
Set 7 Package included:
1 Set Cyclops+ Fan-cooled & Water-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping All-Metal Throat )
1x 0.4 brass nozzles
Set 8 Package included:
1 Set Chimera+ & Cyclops+ Fan-cooled & Water-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping All-Metal Throat )
3x 0.4 brass nozzles
Set 9 Package included:
1 Set Chimera+& Cyclops+ Fan-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges HT-NTC100K(choose 13 in marlin firmware,Nozzle temperature:180C-300C)
Heatsink compound
Set 10 Package included:
1 Set Chimera+ & Cyclops+ Fan-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping Teflon Throat)
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges K type thermocouple(Nozzle temperature:180C-400C)
Heatsink compound
Set 11 Package included:
1 Set Chimera+ & Cyclops+ Fan-cooled & Water-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping All-Metal Throat )
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges HT-NTC100K(choose 13 in marlin firmware,Nozzle temperature:180C-300C)
Heatsink compound
Set 12 Package included:
1 Set Chimera+ & Cyclops+ Fan-cooled & Water-cooled hotend
(2 x All-Metal/Teflon Throat ,Default shipping All-Metal Throat)
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges K type thermocouple(Nozzle temperature:180C-400C)
Heatsink compound
